Product Information

Information Support
- KIT OMAP3530 Summary

KIT OMAP3530 Feature Summary
- Production Quality Source Code: WinCE6.0, Linux2.6.29, Demo for Android,Angstrom and DVSDK
- Modular Design: Carrier board-126mm x 157mm; CPU board- 65mm x 80mm
- OMAP3530 processor (pin-to-pin compatible with OMAP35x families) 
     - 600MHz ARM Cortex-A8 Core
     - NEON SIMD Coprocessor
     - 430MHz TMS320C64x+ DSP Core ,
        high performance Image,Video, Audio accelrator Subsystem
     - Videl Hardware Accelerators
     - Powervr SGX Graphics Accelerator
- 128MByte DDR SDRAM, 166MHz 
- 128MByte SLC NAND Flash, 16bit 
- Boot-up modes choice switch
- AV(CVBS) Out interface 
- S-Video Out interface
- DVI-D high resolution image output interface
- Audio input interface (3.5mm audio jack)
- Audio output interface (3.5mm audio jack)
- TFT LCD interface J18, 24-bit true color, up to 2048x2048, two version TFT LCD for you choice- 4.3 inch and 7inch
- 4-line Touch Screen interface 
- 3-line serial port interfaces, RS232 voltage 
- USB2.0 Host/OTG interface, High-speed, 480Mbps 
- 1-channel SD/MMC/SDHC/SDIO port, supports 3V and 1.8V logic voltage
- 10/100Mbps Ethernet interface, RJ45 connector 
- 1-channel I2C interface
- One expansion connector  at J11 (2.54mm 2*30 Pin Header, about detail signals on the connector, please see below picture)
- 4x4 keyboard, it can be expanded into 6x6 keyboard
- 14-pin JTAG interface 
- RESET button, ON/OFF switch
- Input Voltage: +5V
- Power Consumption: 0.5A @ 5V 
- Temperature Range: -40 C to 85 C (Chip supported) 
- Humidity Range: 20% to 90%

Kit OMAP3530 Development Kit Standard Contents:
- One OMAP3530 Evaluation board 
- One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets) 
- One Serial cable (IDC10-to-DB9) 
- One 5V@1A Power adapter 
- One USB cable

TOP View

Bottom View

Be the first to review this product!

Price: $204.95

• Tell a Friend
• Write review / comment