Product Information
The DMMEGA128A.Net Development Board has all the features to begin developing Ethernet connection applications. The preprogrammed firmware allows users to begin evaluating the board right out of the box with no additional programming of configuration. All that is required to begin exploring the board is a network-enabled computer with an Ethernet adapter and Internet browser
Feature Summary - ATmega128 MCU processing. - Integrated power supply Switching Regulator 5VDC and an REGULATOR +3.3 VDC - Supply power 9-16 volt AC or DC 500 Amp with Bridge Circuit - Serial communication port RS-232. - Memory size required 32 KBYTE a I2C EEPROM on board (number 24LC256-SOIC). - REAL TIME CLOCK DS1307 using frequency 32.768 KHz. - Switch for reset - 2 switches , 2 LED , Buzzer - LCD 16x2 14 PIN Connector (LCD 16x2 for Option) , Resister adjusting brightness of the LCD - CRYSTAL 18.432 MHz frequency for MCU. - SD / MMC Socket (On board). - Ethernet (RTL8019AS) 10Base-T (On board) with LED Status. - Connect for I / O PORT. - Connect for PORT I2C. - Connect for 1-Wire (3 Pins). - Board Size 3.25 "x5.00".
DMMega128A.Net V1.0 Demo Applications - SD/MMC - RTCC Demo - Analog to Digital Demo - Telnet Winsock Demo Application - EasyWeb Demo Application DMMega128A.Net V1.0 Demonstration Program - LED: simple program showing light effect on the led diodes. - PUSH BUTTUN SWITCH : simple program showing light effect on the led. - USART: demonstrates configuring and writing to a UART - LCD: shows text on LCD with use of 4-bit mode - TCPIP Stack : Easyweb Monitor and Winsock Supported - SD/MMC Demo : Basic SD/MMC Source code Information Support - Manual - Schematic Content - DMMaga128A.Net Development board - CD-ROM User's Manual and Source code - RJ45 (Crossover) Cross Cable
Be the first to review this product!
Price: $99.00
Quantity Discounts:
