Product Information
CANUSB is a very small dongle that plugs into any PC USB Port and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial RS232 port) which eliminates the need for any extra drivers or by installing a direct driver DLL for faster communications and higher CAN bus loads. Sending and receiving can be done in standard ASCII format. Features: The module plugs directly into a standard USB port and provides a standard DB9 male output to CAN systems according to CiA (CAN in Automation) DS102-1 recommendations. It is self powered from USB. It consumes max 100mA, but normally not more than 60mA (this depends on BUS load and eventual CAN cable errors etc.). Use your own RS232 LIB/drivers (in e.g. Visual Basic, Deplhi, C++ etc.) together with the free Virtual COM port driver or use the free Direct driver DLL (see Download page for drivers). Works on Windows and Linux platforms. Easy to migrate from CAN232 to CANUSB with some small software changes. Free Windows Threaded CANUSB API DLL or use the ActiveX controller, write applications in a snap.
Manuals are to be read, samples are to be explored, so please take your time and read manuals carefully, study sample softwares. Before you plug in the CANUSB for the first time, read the installation manual for the USB drivers.
Download page http://www.canusb.com/downloads.htm - USB Drivers & Installation Manuals - CANUSB DLL & ActiveX Driver - Visual Basic V6 Demo - CANUSB ASCII Command Manual - Visual C++ V6/7 Demo - Visual Studio 2003 C# Demo - Delphi 2005 - LabView 8 - C Sample Program (Linux) CAN Monitor (for CANUSB with D2XX and CANUSB DLL) Download >> WGSoft CAN Monitor Ver. 1.00 CAN Monitor Lite is a free version from WGSoft. Built using CANUSB API DLL (with D2XX USB drivers) and Delphi 2005. Package only includes the executable file, no source is included. This means you need to install the CANUSB with D2XX drivers and download the CANUSB DLL (See Downloads). The software is provided as is and may be used for free. This is a perfect software to log and send 11bit CAN frames.
Currently LAWICEL cannot answer any support related questions, please contact the vendor WGSoft for support.
Use the 3:rd icon from the left on the toolbar to set CAN Speed etc. then open CANUSB driver with the 1:st icon and then press the green "play button" and you are ready to log frames or/and send frames. Free CAN Bootloader for Microchip dsPIC 30F601A/30F4012 You can read more about this project here. Currently LAWICEL cannot answer any support related questions, please contact the vendor Dimensions: Length: 55mm, Width: 36mm, Height: 16mm. Blue Transparent Case, 1 meter shielded USB cable.
Specifications:
Any News Update : http://www.canusb.com/news.htm
Be the first to review this product!
Price: $169.00
Quantity Discounts:
