Product Information

INTRODUCTION
aMG USB Isolator can be used to uncouple the electrical potential of any USB devices from a PC or a hub. aMG USB Isolator is based on Analog Devices, Inc., iCoupler® technology (ADUM4160 Full/Low Speed USB Digital Isolator and ADUM5000 Isolated DC/DC Converter). These isolation components offer outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral devices. aMG USB Isolator is specifically designed to provide isolation between FiO family of evaluation boards and a host PC, .e.g. when used together with RapidSTM32 Blockset to perform various Hardware-in-the-Loop simulations.

Information Support
- aMG USB Isolator User Manual (PDF)

Feature Summary
- Based on Analog Devices iCoupler® technology.
- Draw power from the USB host with onboard isolated power supply. No need for external power supplies.
- Capable of providing up to 100 mA at USB supply voltage (5V) to any connected peripherals.
- USB 2.0 compatible - Low & Full speed data rate: 1.5 and 12 Mbps
- Bidirectional communication.
- Short-circuit protection for xD+ and xD? lines.
- High common-mode transient immunity: >25 kV/us.
- Enhanced ESD protection (USBLC6-2P6). IEC 61000-4-2 level 4, protect of VBUS and 2 data lines.
- High performance acrylic conformal coating. (Approved to US MIL-1-46058C).
- RoHS compliant.

APPLICATIONS
- Generic USB peripheral isolation.
- Hardware-in-the-Loop isolation when used together with RapidSTM32 Blockset and FiO evaluation boards.

SPEED SELECTION
aMG USB Isolator works at a fixed USB transmission speed; either low speed or full speed. The speed can be set by setting J1 and J2 jumpers. Both jumpers must be set to the same speed setting for proper operation.

Be the first to review this product!

Price: $59.00

• Tell a Friend
• Write review / comment